Representative Publications
|
|
i.
Computational Fluid Dynamics (CFD):
|
|
|
Abdelrahman, M.M. and Al-Bahi,
A.M., "Optimal Smooth and Orthogonal Grid Generation," AIAA -
ISABE Paper No. 91-7033, 10th International Symposium on Air Breathing
Engines, Nottingham, England, United Kingdom, September 1-6, 1991.
|
1.
|
|
|
Al-Bahi,
A.M., Nassef, G.A., and Abdelrahman, M.M., "Heat Transfer
and Fluid Flow in GTA and GMA Weld Pools," 4th International Conference
of Fluid Mechanics, Alexandria, Egypt, April 28-30, 1992.
|
2.
|
|
|
Abdelrahman,
M.M. and Al-Bahi, A.M., "Numerical Solution of the Unsteady
Incompressible Navier-Stokes Equations in Generalized Non-Orthogonal
Curvilinear Coordinates," Journal of Engineering and Applied Science,
Vol.41, No.2 Apr. 1994, pp. 419-434, Faculty of Engineering, Cairo University,Cairo,
Egypt.
|
3.
|
|
|
Abdelrahman,
M.M., Ghazi, M.A., Olwi, I.A., and Al-Bahi, A.M., "Aircraft
Spoiler Effects Under Wind Shear," AIAA Paper , AIAA J. Aircraft, Vol.
31, No. 1, 1994. Presented as Paper No. 92-2642 at AIAA 10th Applied
Aerodynamics Conference, Palo Alto, CA, USA, June 22-24, 1992.
|
4.
|
|
|
Nassef,
G.A., Abdelrahman, M.M., and Al-Bahi,
A.M., “Finite Difference Modeling of Autogeneous TIG Weld Pool Profiles,”
Mansoura Engineering Journal, Vol.21, No.4, Dec. 1996, Mansoura Univ., Egypt.
|
5.
|
|
|
Al-Bahi,
A.M. and Abdelrahman, M.M. “On the Solution of Unsteady Viscous
Incompressible Flow Problems,” Published as AIAA Paper No. 96-0826 by the
American Institute of Aeronautics and Astronautics, Reno, NV, USA, Jan. 1996.
|
6.
|
|
|
Al-Bahi,
A.M., “On Axial Line Singularity Methods for the Flow Around
Bodies of Revolution,” Proceedings of Al-Azhar 5th International Conference,
pp. 389-409, Cairo, Egypt, Dec. 1997.
|
7.
|
|
|
Al-Bahi,
A.M., Radhwan, A.M. and Zaki, G.M., “Laminar Natural
Convection from an Isoflux Discrete Heater in a Vertical Cavity,” Arabian
Journal for Science and Engineering, Vol. 27, No.2C, pp. 149-164, King Fahd
Univ. of Petroleum & Minerals, Dhahran, Saudi Arabia, Dec. 2002.
|
8.
|
|
|
Al-Hazmy,
M.M., Al-Bahi, A.M. and Zaki, G.M., “Numerical Modeling Of Coupled
Natural Convection Conduction Effects on the Heat Load through Building
Facades,” Paper No. IMEC04-2018, Proceedings of the Int. Mech. Eng. Conf.,
Kuwait, Dec. 2004.
|
9.
|
|
|
Al-Bahi,
A.M., Al-Hazmy, M.M., and Zaki, G.M. “Natural Convection in a
Tilted Rectangular Enclosure with a Single Discrete Heater,” JKAU: Eng. Sci.,
Vol. 16 No. 2, pp: 117-136, 2006.
|
10.
|
|
|
Ibraheem AlQadi, Majed
AlHazmy, Ali Al-Bahi, and Wolfgang Rodi, “Large Eddy Simulation of
Flow Past Tandem Cylinders in a Channel,” Flow, Turbulence and Combustion,
Volume 95, Issue 4, pp 621–643, Dec. 2015.
|
11.
|
|
|
|
|
ii.
Experimental and Computational Aerodynamics:
|
|
|
Al-Bahi,
A.M. and Ghazi, M.A., "An Experimental Investigation on
Spoiler Effects," AIAA Paper No. 91-3214, AIAA 9th Applied Aerodynamics
conference, Baltimore, MD, USA, September 23-25, 1991.
|
12.
|
|
|
Aly,
M.S., Olwi, I.A., Al-Bahi, A.M. and Ghazi, M.A., "Experimental
Investigation of the Wind Shear Effect on the Aerodynamic Forces on a
Wing," AIAA Paper No. 91-3216, AIAA 9th Applied Aerodynamics conference,
Baltimore, MD, USA, September 23-25, 1991.
|
13.
|
|
|
Olwi,
I.A., Aly, M.S., Ghazi, M.A. and Al-Bahi, A.M., "A study of
Aerodynamic Forces and Pitching Moment on an Aircraft Model Subject to Wind
Shear," Third Saudi Engineering Conference, King Saud University,
Riyadh, Saudi Arabia, November 24-27, 1991.
|
14.
|
|
|
Al-Bahi,
A.M., Ghazi, M.A., Olwi, I.A., and Aly, M.S. "The Effect
of Downcoming Burst on the Pressure Distribution of Wing Sections," 4th
International Conference of Fluid Mechanics, Alexandria, Egypt, April 28-30,
1992.
|
15.
|
|
|
Abdelrahman,
M.M., Ghazi, M.A., Olwi, I.A., and Al-Bahi, A.M., "Aircraft
Spoiler Effects Under Wind Shear," AIAA J. Aircraft, Vol. 31, No. 1,
1994. Also Presented as AIAA Paper No. 92-2642 at AIAA 10th Applied
Aerodynamics Conference, Palo Alto, CA, USA, June 22-24, 1992.
|
16.
|
|
|
Abdelrahman,
M.M., Ghazi, M.A., Olwi, I.A., and Al-Bahi, A.M.,
"Strake-Wing-Body Configuration under the Effect of Trailing
Vortices," 5th Aeronautical Sciences & Aviation Technology
Conference, ASAT, Military Technical College MTC, Cairo, May 4-6, 1993.
|
17.
|
|
|
Al-Bahi,
A.M., Aly, M.S., Abdelrahman, M.M., and Ghazi, M.A. "An
Experimental Investigation on a Manoeuvring Strake-Wing-Body
Configuration," 5th Aeronautical Sciences & Aviation
Technology Conference, ASAT, Military Technical College MTC, Cairo, Egypt,
May 4-6, 1993.
|
18.
|
|
|
Ghazi,
M.A., Al-Bahi, A.M., Aly, M.S., and Olwi, I.A., "Aircraft
Performance Under Downcoming Burst Hazard," 5th Aeronautical Sciences
& Aviation Technology Conference, ASAT, Military Technical College MTC,
Cairo, Egypt, May 4-6, 1993.
|
19.
|
|
|
Ghazi,
M.A., Al-Bahi, A.M., and Olwi, I.A., "Aerodynamic Performance of
Wing Sections Subject to Microburst," First Pacific International
Conference on Aerospace Science and technology, PICAST'1, Tainan, Taiwan,
Rep. of China, December 6-9, 1993.
|
20.
|
|
|
Al-Bahi,
A.M., "Tanker-Receiver Interference During Aerial
Refueling," First Pacific International Conference on Aerospace Science
and technology, PICAST'1, Tainan, Taiwan, Rep. of China, December 6-9, 1993.
|
21.
|
|
|
Al-Bahi,
A.M., “ Investigation of the Flow Field Past an Airfoil-Spoiler
Configuration,” AIAA Paper No. 96-0552, 34th AIAA Aerospace Sciences Meeting
& Exhibit, Reno, NV, USA, Jan. 15-18, 1996.
|
22.
|
|
|
Sabbagh,
J.A., Al-Bahi, A.M., and Aly, M.S., "On Safe Air-to-Air
Refuelling Operations," Final Report, Grant No. 012/416, King AbdulAziz
University, Jeddah, Saudi Arabia, Jan. 1998.
|
23.
|
|
|
Khalid
S. Al-Ghamdi, Yasser B. Al-Zahrani, Seraj O. Al-Zahrani and Ali M. Al-Bahi,
"Preliminary Design of a Micro Aerial Vehicle," Saudi Society for
Aerospace Sciences' Meeting & Exhibition on Unmanned Aerial Vehicles,
Jeddah, Saudi Arabia, June 2006.
|
24.
|
|
|
H.
Najeeb, H. Al-Soma, A. Al-Johani, A. Al-Wildi, H. Dahan, and A. Al-Bahi,
" Preliminary Design of Mini Unmanned Aerial Vehicle - Saudi Hawk,"
Saudi Society for Aerospace Sciences' Meeting & Exhibition on Unmanned
Aerial Vehicles, Jeddah, Saudi Arabia, June 2006.
|
25.
|
|
|
Ibraheem
M. Al-Qadi and Ali M. Al-Bahi, "Micro Aerial Vehicles Design
Challenges: State of The Art Review," Saudi Society for Aerospace
Sciences' Meeting & Exhibition on Unmanned Aerial Vehicles, Jeddah, Saudi
Arabia, June 2006.
|
26.
|
|
|
S. Habib, A. Al-Bahi, A. Assal, I.
Qadi, and A. Bajouda, KACST Project, Design
and Protyping of a Micro Aerial Vehicle, Phase I-Design, Final Report, Sep. 2006.
|
27.
|
|
|
|
|
iii. Atmospheric
Flight Mechanics:
|
|
|
|
|
|
|
Al-Bahi, A.M. and Ghazi, M.A.,
"Computer Model to Study the Effect of Faulty Controls On Aircraft
Response," International Journal of Modeling and Simulation, Vol. 13,
No. 3, pp.105-109, 1993.
|
28.
|
|
|
Al-Bahi,
A.M. and Abdelrahman, M.M., "Numerical Simulation of
Aircraft Prescribed Maneuvers," International Journal of Modeling and
Simulation, Vol. 13, No. 4, pp.141-145, 1993.
|
29.
|
|
|
Al-Bahi,
A.M. and Ghazi, M.A., "Effect of Atmospheric Disturbances
on Airplane Response," AIAA Paper No. 92-4340, AIAA Atmospheric Flight
Mechanics Conference, Hilton Head Island, SC, USA, August 10-12, 1992.
|
30.
|
|
|
Al-Bahi
, A.M. and Abdelrahman, M.M., "Single Effective Control Law
for an Aircraft Engine," Presented at 6th Applied Mechanics and
Mechanical Engineering Conference (2nd International), AMME, Military
Technical College MTC, Cairo, Egypt, May 3-5, 1994.
|
31.
|
|
|
Abdelrahman
M.M. and Al-Bahi, A.M. "A Generalized Technique for the Inverse
Simulation of Aircraft Motion Along Predetermined Trajectories" AIAA
Paper No 94-3523, AIAA Atmospheric Flight Mech. Conf., Scottsdale, AZ, U.S.A,
August 1-3, 1994.
|
32.
|
|
|
Al-Bahi,
A.M. and Abdelrahman, M.M., “ Effect of Atmospheric
Disturbances on the Inverse Simulation of Aircraft Motion,” AIAA Paper No.
96-3414, AIAA Atmospheric Flight Mechanics Conference, San Diego, CA, USA,
July 29-31, 1996.
|
33.
|
|
|
Al-Bahi,
A.M. and Hariri M.A., “ A Thrust Vectoring Control Law for a
Missile Tracking a Predetermined Launching Trajectory,” Proceedings of
Al-Azhar 5th International Conference, pp. 354-370, Cairo, Egypt, Dec. 1997.
|
34.
|
|
|
M. Jarrah and A. Al-Bahi,
“Neuro-Fuzzy Logic Modeling of High Angle of Attack Aerodynamics,”
International Conference on Multidisciplinary Design in Engineering
(CSME-MDE 2001), Canadian Society for Mechanical Engineering, Concordia University, Montréal, Québec, Canada, November
21-22, 2001.
|
35.
|
|
|
|
|
IV. Reliability,
Maintainability and Safety:
|
|
|
|
|
|
|
Al-Bahi, A.M., "Spare Provisioning
Policy Based on Maximization of Availability per Cost Ratio," Computers
& Industrial Engineering, Vol. 24, No. 1, pp. 81-90, 1993. Presented as
Paper No. M48 at Al-Azhar 2nd Engineering International Conference, Al-Azhar
University, Cairo, Egypt, December 21-24, 1991
|
36.
|
|
|
Bedewy, M.K. and Al-Bahi, A.M., "Evaluation of
Mechanical System Designs Using Fault Tree Technique," 5th Cairo
University Conference on Mechanical Design & Production, Cairo, Egypt,
December 28-30, 1991.
|
37.
|
|
|
T. T. El-Midany, A. M. Al-Bahi,
M. A. El-Baz, and M. S. Abdel-Wahe, “Application of ANNs for System
Reliability Monitoring in Industry,” 2nd meeting of the Egyptian Engineers
Association, Riyadh, Saudi Arabia, May 2010.
|
38.
|
|
|
Nizar A. Qattan and Ali M. Al-Bahi, “Reliability
Analysis of T-56 Turboprop Engine Turbine,” Accepted for presentation in 64th
Annual Reliability & Maintainability Symposium (RAMS), Reno, Nevada, USA,
22 - 25 January 2018.
|
39.
|
|
|
|
|
V. Engineering Education and Accreditation:
|
|
|
|
|
|
Ibrahim
A. Olwi, and Ali M. Al-Bahi, Development
of Fluid Mechanics as an Active Learning Course, Final Report, Project No.: (424 /
619), KAAU, Jeddah, Saudi Arabia, Jul. 2005.
|
40.
|
|
|
Al-Bahi,
A.M., "Development of a Design Phase Checklist for Outcome
Based Active/Cooperative Learning Courses," 2006 Annual Conference &
Exhibition of the American Society of Engineering Education, June 2006.
|
41.
|
|
|
Al-Bahi,
A.M., Zahed, A., Bafail, A., and Abdel Aal, R.,
"Triangulation in Course Assessment Applied in a Freshman Modelling
Course," 10th UICEE Annual Conf. on Eng. Education, Bangkok, Thailand,
19-23 March, 2007.
|
42.
|
|
|
Al-Bahi,
A.M., "HI-CLASS – a Handy Instrument for Course Level
Assessment," ICEET- 2 Int. Conf. on Eng. Education and Training, Kuwait,
April, 2007.
|
43.
|
|
|
Al-Bahi,
A.M., "Exposure Matrix - an Approach to Evaluate Program
Outcomes Using Course Level Direct Assessment," ICEET- 2 Int. Conf. on
Eng. Education and Training, Kuwait, April, 2007.
|
44.
|
|
|
Abdel
Aal, R., Zahed, A., Bafail, A., and Al-Bahi, A.M., "Designing and
Teaching an Introductory Active Learning Outcome Based Course," ICEET-2
Int. Conf. on Eng. Education and Training, Kuwait, April, 2007.
|
45.
|
|
|
Reda M.S. Abdel Aal, Adnan H. Zahed,
Abdallah O. Bafail, and Ali M. Al-Bahi, “Using Multiple Methods to Assess a Freshman
Active Learning Outcome Based Design Course,” 7th Saudi
Engineering Conference, King Saud University, Riyadh, Dec. 2007.
|
46.
|
|
|
Zahed, A., Bafail, O., Abdel Aal, R., and Al-Bahi,
A., “Preparing for ABET Accreditation in Non-Western, Non-English
Speaking Environment,” 2008 Annual Conference & Exhibition of
the American Society of Engineering Education, June 2008.
|
47.
|
|
|
Al-Bahi, A.,
“Designing Undergraduate Engineering Lab Experience to Satisfy ABET EC2000
Requirements,” 2008 Annual Conference & Exhibition of the American
Society of Engineering Education, June 2008.
|
48.
|
|
|
Faisal I. Iskanderani, Reda M. Abdelaal, and Ali
M. Al-Bahi, “Enhancing the Entrepreneurship Skills of KAU Engineering
Students through ABET International Accreditation,” Esamion 2009 Forum,
Entrepreneurs in the Shade of Global Trade, King Abdulaziz University,
Jeddah, Saudi Arabia, Nov. 2009.
|
49.
|
|
|
Faisal I. Iskanderani and Ali M. Al-Bahi,
“A Case Study in Preparing for ABET Accreditation at King Abdulaziz
University,” Global Higher Education Forum, FHEF 2009, Penang, Malysia, Dec
2009.
|
50.
|
|
|
Faisal
I. Iskanderani, Abdelfattah A. Soliman, Reda A. Abdulaal, and Ali M. Al-Bahi,
“A Project-Based Active/Cooperative Engineering Design Course for Freshman
Level Students,” 5th International Forum on Engineering
Education (IFEE2010), Jointly with: European SDPROMO II Conference, Sharjah,
United Arab Emirates, Nov. 2010.
|
51.
|
|
|
Ali
M. Al-Bahi, Reda M.S. Abdul Aal, Abdelfattah Y. Soliman, and Faisal I.
Iskanderani, “Introductory Project Based Design Course to Meet Socioeconomic
Challenges,” 2011 Annual Conference & Exhibition of the American Society
of Engineering Education, June 2011
|
52.
|
|
|
R.
M. Abdulaal, A. M. Al-Bahi, A. Y. Soliman & F. I. Iskanderani,
“Design and Implementation of a Project-Based Active/Cooperative Engineering
Design Course for Freshmen,” European Journal of Engineering Education, Vol.
36, No. 4, August 2011, 391–402.
|
53.
|
|
|
Ali
M. Al-Bahi, Mahmoud A. Taha, and Nedim Turkmen, “Teaching and
Assessing Engineering Professional Skills,” Int. J. of Engineering Pedagogy, Volume 3, Issue 3, June 2013.
|
54.
|
|
|
Ali
M. Al-Bahi,
Mahmoud A. Taha, and Nedim Turkmen, “Capstone Design Projects in the
Environment of Weak Industry-Academia Interaction,” 2014 IEEE Global
Engineering Education Conference (EDUCON), Istanbul, Turkey, April 2014.
|
55.
|
|
|
Ali
M. Al-Bahi
and Abdulfattah Soliman, “Design of a Project Based Active Cooperative Course
to Develop and Assess Safety Culture in Undergraduate Nuclear Engineering
Programs,” 2015 World Engineering Education Forum and the 18th
Int. Conf. on Interactive Collaborative Learning, Florence, Italy September
2015.
|
56.
|
|
|
Ali
M. Al-Bahi
and Abdelfattah Y. Soliman, “Designing a Resilience Module in an Introductory
Engineering Design Course for Freshmen,” 2016 IEEE Global Engineering
Education Conference (EDUCON), 10-13 April 2016, Abu Dhabi, UAE, downloadable
from: http://ieeexplore.ieee.org/document/7474640/
|
57.
|
|
|
Ali
M. Al-Bahi and Abdelfattah Y. Soliman, “On
the Assessment of Sustainability of Engineering Education,” WEEF & GEDC, The world Engineering Education Forum,
6-10 Nov 2016, Seoul, Korea.
|
58.
|
|
|
Abdelfattah
Y. Soliman and Ali M. Al-Bahi, “Rethinking
Educational Approaches in Product Design to Achieve Sustainability
Objectives,” 2017
IEEE Global Engineering Education Conference (EDUCON), 25-28 April 2017,
Athens, Greece.
|
59.
|
|
|
Ali
M. Al-Bahi
and Abdelfattah Y. Soliman, “Sustainability SMART Indicators of Engineering
Education for Sustainable Development,” 2018 IEEE Global Engineering
Education Conference (EDUCON), Tenerife, Canary Islands, Spain, April 18-20,
2018.
|
60.
|
|
|
Ali
M. Al-Bahi
and Abdelfattah Y. Soliman, “A Six-Sigma Approach to Improve the Acquisition
of Engineering Competencies,” 2018 IEEE Global Engineering Education
Conference (EDUCON), Tenerife, Canary Islands, Spain, April 18-20, 2018.
|
61.
|
|
|
Abdelfattah
Y. Soliman and Ali M. Al-Bahi, "A Win-Win Strategy to Integrate
Sustainability Objectives in Product Design – An Educational Approach," Int. J. of Engineering Pedagogy, Accepted for
publication, May 2018.
|
62.
|
|
|
Abdelfattah
Y. Soliman and Ali M. Al-Bahi, “Enhancing Lifelong Learning Skills through Academic
Advising,” accepted for presentation at ICL 2018, International Conference on
Interactive Collaborative Learning, Koss Islands, Greece, September
25-28, 2018.
|
63.
|
|
|
|
|
VI. Civil
Nuclear Applications:
|
|
|
|
|
|
Ali
M. Al-Bahi,
Abdelfattah Y. A. Soliman, Mohamed H. M. Hassan & Nader M. A. Mohamed,
“Concept design of an illicit material detection system,” J. Radioanalytical
and Nuclear Chemistry, Vol. 299, No. 1, pp. 351–356, Jan. 2014.
|
64.
|
|
|
Ali
M. Al-Bahi, Abdelfattah
Y. A. Soliman, Abdulrahim Alzahrani, Faisal Abdelhady, and Nader M. A.
Mohamed, “Concept design of a PGNAA system for optimizing the performance of
gravity separators,” J. Radioanalytical and Nuclear Chemistry, Vol. 304,
Issue 2, pp 925-931, May 2015.
|
65.
|
|
|
Ali
M. Al-Bahi,
Abdelfattah Y. Soliman, and Nader M. A. Mohamed, “Investigating Neutron Back
Scattering Technique for the Detection of Oil Water Separation Levels in
Horizontal Gravity Oil Separators,”J. Radioanalytical and Nuclear
Chemistry, Vol. 315, Issue 2, pp. 323-330,
DOI: 10.1007/s10967-017-5675-2, FEB 2018.
|
66.
|
|
|
Ali M. Al-Bahi, Abdelfattah Y.
Soliman, and Nader M. A. Mohamed, “Detection of Illicit Material Using
Neutron Activation: Weakness and Solutions J. Radioanalytical and Nuclear
Chemistry, Vol. 315, Issue 3, pp. 557-564,
DOI: 10.1007/s10967-017-5689-9, March 2018.
|
67.
|
|
Last Update
10/11/2018 11:19:30 AM
|
|